Horizontal Homogenizer
Taking into consideration the importance of large-scale equipment
during practical operation and the situation that the main stressed
parts are operating, proceeding from the reliability and stability
of equipment, the company designs the equipments above 55kw
(including 55kw) into horizontal structure.
Technical features
Appearance:
1. The fully closed stainless steel structure is adopted, which is
safe, sanitary and nice looking.
2. The outer cover adopts module structure, which enables rapid
assembly and disassembly and facilitates maintenance and servicing.
Transmission part:
1. The lubricating of transmission part adopts special lubricating
method combining spatter lubricating and forced pressure
lubricating, which greatly enhances safety and reliability
performance.
2. Crank shaft is made of forged alloy steel, with super high
strength and long service life.
3. The gearbox is designed with externally allocated hard gear
face, with reliable performance and simple maintenance.
4. It is provided with independent forced cooling system, which s
equipped with special tubular cooler to carry out forced cooling to
the lubrication so as to guarantee the oil temperature of system
can satisfy long period and steady operation of equipment.
Hydraulic end part:
1. The structure design of integral pump body provides reliable
guarantee for strength and service life.
2. The design of rapid assembly and disassembly of value core and
value seat facilitates the assembly and disassembly.
3. The valve seat adopts double face design, which has double
service life.
4. Sanitary pressure diaphragm mater is adopted to indicate the
pressure, whose reliable performance comes from world fa,ous brand
pressure gauge manufactures.
| No. | Item | Specification |
| 1 | Model | GHH-Q6000-P70 |
| 2 | Capacity | 6000L/H |
| 3 | Homogenizing pressure | Max:700bar |
| Working pressure:560bar |
| 4 | Motor | 132KW |
| 5 | Homogenizing | Two stage |
| 6 | Pressure adjusting | Two stage adjusting |
| 7 | Speed reducing | Built-in reduction gear |
| 8 | Drive box | 3 pistons |
| 8 | Lubrication | Forcing ＋ splash |
| 9 | Volumetric efficiency | 95％ |
| 10 | Moving time | Equipment can work more than 20 hours |
| 11 | Oil and bearing temp. | External oil cooling system, oil temp.≤65℃ |
| 12 | Inlet and outlet connection | SUS Clamp connection, 2" |
| 13 | Material Temp. | 5～90℃ |
| 14 | Moving noise | ≤85db |
| 15 | Cooling water | Normal pressure, normal temp. tap water spray cooling |
| 16 | Seal ring | 4 F rectangular ring |
| 17 | Cover material | SUS |
| 18 | Dimension(MM) | 2650*2150*1100mm |
